Metal halide perovskite photodetector arrays via dry lift-off patterning @Adv. Eng. Mat.

Metal halide perovskite photodetector arrays via dry lift-off patterning @Adv. Eng. Mat.

Metal halide perovskites draw increasing attention as photodetector materials due to their strong visible light absorption and resulting photocurrent. The development of efficient fabrication routes to realize high-resolution perovskite pixel arrays is critical to enable practical devices.

In this work, we report a dry lift-off process to fabricate methylammonium lead iodide (MAPbI3) pixels on different substrates, with a resolution down to 5 µm. Accordingly, 8 × 10 photodetector arrays were fabricated on both glass and flexible polyethylene terephthalate (PET). These arrays show a sensitive photoresponse over a broad wavelength range from 320 to 760 nm. Moreover, when encapsulated by a Parylene-C overlayer, the photodetector arrays on glass substrate show remarkable air stability, without noticeable performance loss after 10 days in ambient air, and the flexible photodetector arrays on PET substrate show excellent bending tolerance, retaining nearly 95% of the response after 170 bending cycles.

The paper can be accessed here or on the Publications page of our website.

Navigation

Social Media